Mounting The Welding Torch - Abicor Binzel ABICAR ADVANCED Betriebsanleitung

6 Putting into operation

6.6 Mounting the welding torch

Continual contact must be ensured between the device and the workpiece. Adjustment can be made either
by means of the guide arms or the corresponding accessories.
 6.2 Adjusting and changing guide arms on page EN-13
Fig. 9
A Cross slide
B Stop lever
C Locking screw
When attaching the welding torch mount, ensure that the welding torch does not become damaged.
Attach the welding torch mount (D) with the stop levers (B).
1
Clamp the welding torch (E) into the welding torch mount (D) using the locking screw (C).
2
Roughly align the welding torch (E) with the stop levers (B).
3
Use the cross slide (A) for fine adjustment.
4
EN - 16
Mounting the welding torch
A
ABICAR ADVANCED
D Welding torch mount
E Welding torch
B
C
D
E