Product-Specific Safety Instructions; Safety Instructions For The Power Supply; Personal Protective Equipment; Emergency Information - Abicor Binzel ABIBUG 300 Originalbetriebsanleitung

2 Safety
Safety instructions for electrical components
► Check electric tools for damage and for its proper functioning in accordance with its designated use.
► Do not expose electric tools to rain and avoid a moist or wet environment.
► Protect yourself from electric shock by using insulating mats and wearing dry clothing.
► Do not use the electric tools in areas subject to fire or explosion hazards.
Safety instructions for welding
► Arc welding may cause damage to the eyes, skin and hearing. Note that other hazards may arise when
the device is used with other welding components. Therefore, always wear the prescribed personal
protective equipment as defined by local regulations.
► Any metal vapors, especially lead, cadmium, copper and beryllium are harmful. Ensure sufficient
ventilation or extraction. Do not exceed the current occupational exposure limits (OEL).
► To prevent the formation of phosgene gas, rinse workpieces that have been degreased with chlorinated
solvents using clean water. Do not place degreasing baths containing chlorine in the vicinity of
the welding area.
► Adhere to the general fire protection regulations and remove flammable materials from the vicinity of
the welding work area prior to starting work. Provide appropriate fire extinguishing equipment in
the workplace.
Safety instructions for personal protective equipment
► Do not wear loose fitting clothing or jewelry.
► Use a hair net for long hair.
► Wear safety goggles, protective gloves, and a respiratory mask, if necessary.

2.5 Product-specific safety instructions

► If it is necessary to replace power cords or device connecting cables, only models indicated by the
manufacturer may be used.

2.6 Safety instructions for the power supply

► Ensure that the mains connecting cable is not damaged, for example, by being driven over, crushed or
torn.
► Check the mains connecting cable for damage and wear at regular intervals.
► If it is necessary to replace the mains connecting cable, only models indicated by the manufacturer may
be used.
► Only a qualified electrician should replace the mains connecting cable and the mains plug.
► Splash-water protection and mechanical stability must be ensured when replacing the mains plug of the
mains connecting cable.

2.7 Personal protective equipment

► Wear your personal protective equipment (PPE).
► Ensure that others in close proximity are also wearing personal protective equipment. Personal
protective equipment consists of protective clothing, safety goggles, a class P3 respiratory mask,
protective gloves, and safety shoes.

2.8 Emergency information

► In the event of an emergency, press the emergency switch immediately.
► Extinguish burning oil or emulsions using a CO
EN - 10
or powder fire extinguisher.
2
ABIBUG 300