Herunterladen Inhalt Inhalt Diese Seite drucken

Warning And Notice Signs; Basic Safety Instructions - Abicor Binzel ABIBUG 300 Originalbetriebsanleitung

Orbitalschweißautomat
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ABIBUG 300

2.3 Warning and notice signs

The following warning, notice and mandatory signs can be found on the product:

2.4 Basic safety instructions

The product has been developed and manufactured in accordance with state-of-the-art technology and the
recognized safety standards and regulations. Inevitable technical residual risks to the user, third parties,
devices, or other material property are posed by the product. The manufacturer will accept no liability for
damage caused by non-observance of the documentation.
► Before using the system for the first time, please read the provided documentation carefully.
► Do not operate the product unless it is functioning properly and ensure compliance with all documents.
► Before carrying out specific work, for example, commissioning, operation, transport and maintenance,
read the documentation carefully.
► Use suitable means to protect yourself and bystanders from the hazards listed in the documentation.
► Store the documentation within easy reach of the device for reference and enclose all documents when
passing on the product.
► Consult the documentation for additional welding components.
► Information about how to handle gas cylinders can be found in the instructions provided by the gas
manufacturer and the relevant local regulations, e.g., regulations that apply to compressed air.
► Observe the local accident prevention regulations.
► Only trained specialists should commission, operate, and service the device. Qualified personnel are
persons who, based on their special training, knowledge, experience and due to their knowledge of
the relevant standards, are able to assess the tasks assigned to them and identify possible dangers.
► Keep the work area in order. Ensure good lighting of the work area.
► Switch off the power supply, gas supply, and compressed air and unplug the power plug for the entire
duration of maintenance, commissioning, and repair activities.
► For disposal, observe the local regulations, laws, provisions, standards and guidelines.
► Disconnect the mains plug.
► Wear a respiratory mask.
► Wear protective gloves.
► Read and observe the operating instructions.
Risk of hand injuries. Risk of crushing.
► Wear protective gloves.
Warning against hot surfaces. Risk of burns.
► Do not touch hot surfaces.
Electrical voltage warning. Danger of electric shock.
► Only a trained electrician should open the device.
► Interrupt the electrical power supply before performing maintenance work.
2 Safety
EN - 9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis