Handling A Video Cassette; Inserting A Video Cassette; Ejecting A Video Cassette; Protecting Your Cassette From Being Erased - Sony SVT-RA96P Bedienungsanleitung

Handling a Video Cassette

This section shows you how to insert a video cassette
into the VCR.

Inserting a Video Cassette

Insert the cassette into the cassette compartment by
slowly pressing its center with the arrow on the top.
When the cassette is inserted, the VCR automatically
turns on and the q indicator lights in the display
window.
If you insert the cassette without its safety tab and are
going to start recording, the VCR ejects the cassette
automatically.
Cassette compartment

Ejecting a Video Cassette

To eject the cassette, press EJECT Z on the VCR.
You can eject the cassette even when the power is off.
When you press EJECT Z, the VCR turns on
automatically.
After ejecting the cassette, the VCR turns off again.
16
Remove the tab on the cassette with a screwdriver or a
similar tool as shown below. This protects your
cassette against an accidental recording.
If you want to record again on the cassette without its
safety tab, simply cover the safety tab hole with a piece
of plastic tape.
EJECT Z
Protecting Your Cassette from
Being Erased
Safety tab