Playback; Audio Playback - Sony SVT-RA96P Bedienungsanleitung

Playback

COUNTER/ COUNTER
REAL TIME RESET
1
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Select the playback speed by pressing REC/PLAY
SPEED – or +.
The selected playback speed is displayed in the
display window.
4
Press PLAY B.
Playback starts.
To stop playback
Press STOP x.
To rewind the tape
Press STOP x and then REW m.
To fast-forward the tape
Press STOP x and then FF M.
Resetting the tape counter
The tape counter in the display window helps you to
locate a certain scene after playback. Set the
COUNTER/REAL TIME switch to COUNTER and
press COUNTER RESET to set the counter to
"0H00M00S" (counter zero) position before playing
back the tape. The VCR keeps counting the length of
the tape being played back. Note, however, that the
tape counter will not count the portions without video
signals.
Notes
• You cannot play back tapes recorded on other time-lapse
VCRs on this VCR and vice versa.
• If ALARM DATA REC in the ALARM SET menu and/or
TAPE USED COUNT in the GENERAL SET menu is set
to ON, the VCR will rewind the tape and playback will
start from the beginning of the tape. While the VCR is
rewinding the tape, "<AL DATA REC>" and/or "<T-
USED COUNT>" flashes on the monitor screen.
REW FF STOP
m M x
2 3 4
Playback speed
You can view the playback picture at one of the
following speeds.
Recording Playback speed
speed
6 (8) 18 (24) 30 (40) 48 (64) 72 (96) 96 (128)
6 (8) 1 1/3 1/5
18 (24) 3 1 3/5
30 (40) 5 5/3 1
48 (64) 8 8/3 8/5
72 (96) 12 4 12/5
96 (128) 16 16/3 16/5
For example, when a tape recorded in 96-hour mode is
played back in 6-hour mode, you can view the
playback picture at a speed 16 times faster than the
recorded one.

Audio Playback

You can play back the sound with the picture if a tape
is recorded in 8-, 24-, or 40-hour mode (when using
E-240 tape), or 6-, 18-, or 30-hour mode (when using
E-180 tape).
Play back the tape at the same speed at which it was
recorded so that you can monitor the sound normally.
For audio playback in 8-hour (when using
E-240 tape), or 6-hour (when using E-180 tape)
mode
Play back the tape normally.
1/8 1/12 1/16
3/8 1/4 3/16
5/8 5/12 5/16
1 2/3 1/2
3/2 1 3/4
2 4/3 1
39