Setting The Time/Date Display; Changing The Display Position Of The Time/Date Display - Sony SVT-RA96P Bedienungsanleitung

Setting the Time/Date Display

You can display five items of information (date, time,
recording/playback speed, number of alarm recordings
and warning display) and turn off each item which you
do not want to display.
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "2" of the MAIN
MENU flashes on the monitor screen.
3
Press MENU B.
The DISPLAY SET menu appears.
4
Press MENU V to move the flashing to the setting
of each DATE, TIME, SPEED, ALARM and
WARNING, and set to ON or OFF by pressing
MENU + or –.
Example: When you set the date display to OFF.
5
Press SEARCH to return to the normal display.
To return to the MAIN MENU screen from the
current menu
Press MENU again.
To go to the next menu from the current menu
Press MENU V while keeping MENU B pressed.
To turn off the screen display
Set the ON-SCREEN switch to OFF.
Changing the Display Position of
the Time/Date Display
You can change the position of the time/date display
that appears on the monitor screen.
1
Turn on the power of the equipment to be used.
The normal display appears.
2
Change the display position as follows.
To move the display downwards, press MENU V.
(When the display reaches the bottom of the
screen, the display returns to the top of the screen.)
To move the display rightwards, press MENU B.
(When the display reaches the right-hand edge of
the screen, the display returns to the left-hand edge
of the screen.)
Note
While recording, this function does not work.
Alarm count
Recording/playback
speed
Current time
Date
Alarm count
Recording/
playback speed
Current time
Press MENU B.
Press MENU V.
15