Terminals; Warning Out Terminal; Tape End/Series Out Terminal - Sony SVT-RA96P Bedienungsanleitung

Terminals

WARNING OUT Terminal

This terminal will help you to know when something
wrong has happened to the VCR during recording.
The VCR outputs a pulse signal from WARNING
OUT terminal.
COM terminal
Tape recording stops.
WARNING OUT terminal
5 V
0 V
To reset the output signal,
press STOP x or
EJECT Z, or press the CL
button.

TAPE END/SERIES OUT Terminal

TAPE END Terminal
When the VCR detects the tape end or the time counter
shows "8:00:00" or "6:00:00" (depending on the
TAPE setting of the GENERAL SET menu) during
recording, the output level becomes 0 V DC. To
resume the 5 V output, press the operation button
(EJECT Z, REC z, FF M, REW m, PLAY B or
STOP x etc.).
COM terminal
REC mode
Tape end Beginning of tape
Recording
Rewind
mode
Output
signal
REPEAT REC mode
Tape end
Recording Rewind
mode
Output
signal
2 sec.
TAPE END/SERIES OUT terminal
Press operation
button.
Stop
5 V
0 V
Beginning of tape
Recording
5 V
0 V
45