Recording; Displaying The Real Time (In Recording, Recording Pause Or Stop Mode Only) - Sony SVT-RA96P Bedienungsanleitung

Recording

This section shows you how to record the signal from
the video camera in the normal or time lapse mode, to
set the security lock, to record repeatedly on the same
cassette and series recording.
1
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Set the recording speed by pressing REC/PLAY
SPEED + or –.
The recording speed changes depending on the
tape used (E-180 or E-240 tape).
Recording Maximum recording time
speed
E-180 E-240
tape
tape
6 (8) LP mode 6
18 (24) 18
Time
lapse
30 (40) 30
mode
48 (64) 54
72 (96) 78
96 (128) 102
Note
When using a E-180 tape in 48H, 72H and 96H modes,
it is possible to record additionally 6 hours longer than
the displayed recording time.
When using a E-240 tape in 64H, 96H and 128H modes,
it is possible to record additionally 8 hours longer than
the displayed recording time.
In the display window
20
STOP x
3
2 4
PAUSE X
Interval Audio Tape
recording motion
8 1/50 Possible Continuous
24 0.06
40 0.1
72 0.18 Impossible Intermittent
104 0.26
136 0.34
Recording speed
4
Press REC z.
Recording starts.
To stop recording
Press STOP x.
To pause recording
Press PAUSE X.
To resume recording, press the button again. If pause
continues for more than 5 minutes, the VCR
automatically stops.
If recording does not start and the cassette is
ejected
The tab on the cassette is removed to protect against
accidental recording. Use a cassette with its safety tab
or cover the safety tab hole with a piece of plastic tape.
Displaying the real time (in recording,
recording pause or stop mode only)
Set the COUNTER/REAL TIME switch to REAL
TIME. The real time will be displayed in the display
window. In playback mode, the display shows the tape
counter regardless of the switch position.