Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BAE SA-OH-059-YI- ----
Photoelectric Sensors
4
Product description (continued)
4.2
Function
The IO-Link sensor amplifier serves as an evalua-
tion unit for Balluff sensors of the BOH series. This
device has an IO-Link communication interface,
which requires an IO-Link master for operation. The
IO-Link interface allows direct access to sensor
values and parameters and offers the possibility to
parameterize the device during operation.
The device description files required for configuring
the IO-Link device as well as detailed information
on sensor values, diagnostic information and para-
meters can be found at www.balluff.com on the
product page.
4.3
Display elements
The settings of the amplifier can be changed via the control
panel with the status LEDs. For displaying the current set-
tings as well as the current signal value there is an OLED
display next to the control panel.
3
8
7
6
5 4
2
Fig. 4-3:
Control panel of the amplifier
No.
Element
1
OLED
2
OUT
Yellow
3
Alarm
Red
4
OUT 2
Yellow
Green, alterna-
ting with LED off
at a ratio of 10:1,
5
IO-L
1 s period
Green, static
6
SYNC
Orange, static
7
Button
Switch
+
Switch
8
Switch
-
www.balluff.com
1
Function
Display status/values
Output 1 status
Alarm status / Teach
status
Output 2 status
IO-Link communication is
active
The device is ready for
operation
The device is ready for
operation
Synchronization
established
Multifunction button:
Back (in menu),
screen off (display),
Easy-Teach (hold down
for 3 s)
Scroll through menu
items or increase value
(Pressing and holding the
button causes the values
to scroll through quickly)
Confirmation or
parameter transfer
Scroll through menu item
or decrease value
(Pressing and holding the
button causes the values
to scroll through quickly)
4.4
Labelings
1)
1)
Order code
1)
Type
2)
Fig. 4-4:
Labelings (examples)
2)
2)
english
9
Werbung
Kapitel
Inhaltsverzeichnis
