Teach; Amplification; Ssc X Parameter - Balluff BAE SA-OH-059-YI-DP02 Betriebsanleitung

BAE SA-OH-059-YI- ----
Photoelectric Sensors
8
Menu structure (continued)
8.3

Teach

TEACH TEA Teach
1-V-T SP1 1V1
2-V-T SP1 2V1
Dyn-T SP1 DT1
1-V-T SP2 1V2
2-V-T SP2 2V2
Dyn-T SP2 DT2
Dyn-T SP12 DT12 Start SP12 -> Stop SP12
Teach menu
Value Meaning
1-Value-Teach Setpoint 1 Do set SP1 (and apply)
1-V-T SP1
2-V-T SP1 2-Value-Teach Setpoint 1 Do set TP1 (SP1)
Dyn-T SP1 Dynamic Teach Setpoint 1 Start Teach SP1
1-V-T SP2 1-Value-Teach Setpoint 2 Do set SP2 (and apply)
2-V-T-SP2 2-Value-Teach Setpoint 2 Do set TP1 (SP2)
Dyn-T SP2 Dynamic Teach Setpoint 2 Start Teach SP2
Dyn-T SP12 Dynamic Teach (Balluff
Spec) Setpoint 12
Tab. 8-2: Menu structure – Teach Menu
20 english
Do-1-V-Teach SP1
Do TP1 -> Do TP2 -> Apply
Start SP1 -> Stop SP1
Do-1-V-Teach SP2
Do TP1 -> Do TP2 -> Apply
Start SP2 -> Stop SP2
Description
Do set TP2 (SP1)
Apply settings
Stop Teach SP1 (and apply)
Do set TP2 (SP2)
Apply settings
Stop Teach SP2 (and apply)
Start Teach SP12
Stop Teach SP12 (and
apply)
Manual Set Menü
TEACH TEA Teach
Manual MAN
Amplific. AMP Amplification: 6..255*
SSC1-SP1 SC1 SSC1 Switching Point 1:
SSC1-SP2 SC1 SSC1 Switching Point 2:
SSC2-SP1 SC2 SSC2 Switching Point 1:
SSC2-SP2 SC2 SSC2 Switching Point 2:
T-Select SEL Def.(SSC1), SSC1, SSC2,
8.3.1

Amplification

The amplification of the receiver signal can be set in the
range of 6..255.
6: Lowest amplification: Smallest signal, less noise, low
range
255: Highest amplification: Largest signal, more noise, high
range
8.3.2

SSC X Parameter

This parameter represents the currently set switching
points (setpoint 1 and setpoint 2). The switching point 1
(setpoint 1) is active in all switching modes and can be
taught. Switching point 2 (setpoint 2) is only active in
Two-Point or Window Mode and is otherwise deactivated.
250..500*..4000
250*..4000
250..500*..4000*
250*..4000
SSC1&SSC2