Sensor Mode; Speed Mode; Sync Mode - Balluff BAE SA-OH-059-YI-DP02 Betriebsanleitung

BAE SA-OH-059-YI- ----
Photoelectric Sensors
8
Menu structure (continued)
8.6.7

Sensor Mode

Standard:
LED supply from DCDC converter;
Uledmax = 6 V (lower current consumption and less heat
generation)
Light Array:
LED supply directly from operating voltage;
UledMax = UB - 6 V
In sensor mode "Light Array" Tu_max is reduced to 45°C
when using power mode "High" if more than 4 BAE are
operated side by side or the BAE must have a lateral
distance of 5mm from each other.
Value Meaning
Standard Standard
LightArray Light Array
Tab. 8-16: Configuration – Sensor Mode
8.6.8

Speed Mode

Maximum switching frequency of the sensor:
Value Meaning
Standard Standard
Fast Fast
Super Fast Superfast
Sync 6 Sync6
Sync 8 Sync8
Precision Precision
High Pr 25 High Precision 25 Hz
High Pr 30 High Precision 30 Hz
Tab. 8-17: Configuration – Speed Mode
8.6.9

Sync Mode

The sensor can be synchronized with other sensors. Here,
the BAE can assume the role of both master and slave.
The master must always be on the right. The synchroniza-
tion is done by an infrared interface.
Value Description
Auto Send and receive
Master Send only
Slave Receive only
Off No Sync-Signal
Tab. 8-18: Configuration – Sync Mode
www.balluff.com
Description
(for BOH with one LED)
(for BOH with several LEDs,
e.g. light bands)
Max. switching frequency
500 Hz
2 kHz
4 kHz
250 Hz
150 Hz
125 Hz
25 Hz
30 Hz
Max. number of synchronized sensors
3 (1x Master + 1x Auto + 1x Slave)
2 (1 x Master + 1 x Slave)
Synchronization not possible
6 (1x Master + 4 x Auto + 1 x Slave)
8 (1x Master + 6 x Auto + 1 x Slave)
2 (1 x Master + 1 x Slave)
2 (1 x Master + 1 x Slave)
2 (1 x Master + 1 x Slave)
Slave Auto
Fig. 8-27: Configuration – Communication Sync Mode
Master
english 25