Led Meaning - Balluff BAE SA-OH-059-YI-DP02 Betriebsanleitung

BAE SA-OH-059-YI- ----
Photoelectric Sensors
8
Menu structure (continued)
8.7

LED Meaning

Description
Only the signal with the highest priority is displayed. The
signals are listed in descending priority.
LED IO-L (Operating State and Communication)
Name
Communication
Device Discovery
Ready
Tab. 8-20: Meaning of the LED states, LED IO-L
LED Alarm (Indication/Warning/Teach/Device Discovery)
Name
Short Circuit Pin 2 / Pin 4
Teach-in No Object
Teach-in
Bad Signal Quality
Tab. 8-21: Meaning of LED States, LED Alarm
LED OUT
Name
OUT
Tab. 8-22: Meaning of LED States and Configuration, LED OUT
LED OUT 2
Name
OUT 2
Tab. 8-23: Meaning of LED States and Configuration, LED OUT2
LED SYNC
Name
SYNC
Tab. 8-24: Meaning of LED States and Configuration, LED SYNC
www.balluff.com
Signal
Green, alternating with LED off
in a ratio of 10:1, 1 s period
Green flashing 2 Hz
Green, static
Signal
Red, flashing, 5 Hz 1:2
Red, flashing, 2 Hz 1:1
Red, static
Red pulse 50 ms
Signal
Yellow, static
Signal
Yellow, static
Signal
Orange, static
Meaning
IO-Link communication is active. The device is ready.
The Device Discovery can be activated via a system
command to find the device again.
The device is ready.
Meaning
Short circuit at pin 2 or pin 4
The sensor is in Teach-In mode and no object is visible.
Teaching is not possible.
The device is currently in teach-in mode
Poor signal quality, the signal quality is below the war-
ning threshold.
Meaning
Output 1 status
Meaning
Output 2 status
Meaning
Synchronization established
english 27