Product Description; Construction; Function; Operating And Display Elements - Balluff BOS R090K U-RX10-S49-Serie Betriebsanleitung

BOS R090K-_U-RX10-S49/S75/02
Optoelectronic sensors – Through-beam sensors
4

Product description

4.1

Construction

BOS R090K- _ U-RX10-S49
BOS R090K- _ U-RX10-S75
Setting the operating mode
0.1
19.5
0.1 19.5
3.4
3.4
11.8
8.2
11.8
8.2
BOS R090K- _ U-RX10-02
2-M3
2-M3
3.4
3.4
Transmitter only
1)
Receiver only
2)
Fig. 4-1: Dimensions, design and function
4.2

Function

Through-beam sensors are sensors with separate
transmitter and receiver units, which must be
aligned to each other on both sides of the detection path.
When an object interrupts the light beam, the receiver
switches, i.e. the output signal changes.
www.balluff.com
Optical axis
Lens
7.4
7.4
Yellow LED
1)
Green LED
2)
Sensitivity setting
2)
7.4
7.4
4.3

Operating and display elements

4.3.1

Operating mode switch (receiver only)

Setting Meaning
L Light on / NO contact
D Dark on / NC contact
Tab. 4-1: Operating mode switch
4.3.2

Sensitivity setting (receiver only)

The rotary switch can be used to configure the sensitivity
and range of the receiver.
NOTICE
Product damage
If the sensitivity setting is turned past the end stop, the
setting function can be damaged.
► Do not turn the potentiometer past the mechanical
end stop at 270°.
Setting Meaning
Turn clockwise Increase sensitivity.
Turn Reduce sensitivity.
counterclockwise
Tab. 4-2: Sensitivity setting
4.3.3

LED indicators

LED Meaning
Yellow Operating indicator: The LED lights
1)
up as soon as the transmitter is
active.
Green Stability indicator: The LED lights
2)
up as soon as the sensor is
operational and is operating in a
safe range.
Transmitter only
1)
Receiver only
2)
Tab. 4-3: LED
english 7