Setting The Menu Position & Size; Settings Of The Extended Mouse Support - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
6.1.6 Setting the Menu Position & Size
With this you change the position and size of all
cursor to the corresponding entry in the menu CONSOLE SETUP.
After having pressed
display to the wanted position with the
M E N U - P O S I T I O N
Esc
For making sure that
the display can be changed with the keys picture up/picture down at a
resolution higher than 640 x 480.
ENTER
closes the entry and leads you back to the CONSOLE SETUP
(temporary saved).
For saving this setting and leaving the CONSOLE SETUP press
(permanently saved).
6.1.7

Settings of the extended Mouse Support

With this the special keys of the Intelli Explorer Mouse for working with
CATVision are activated. By setting the entry to "Yes"
called up by pressing button 4 or 5 of the Explorer Mouse (left side buttons).
After having moved the cursor to the array „AdonIS by Mouse" you can select
the wanted option with
For saving the settings and closing the menu press F1.
ENTER
you get to the edit mode and can move the
Enter
AdonIS
can be read easily at all resolutions the size of
SPACE
(toggle) or the keys
page 32
AdonIS
cursor control keys
AdonIS
Y + N.
Operating Instructions
CATVision (MC)
windows. Move the
or mouse.
C V M
F1:Save
F1
can also be