EBECO EB-Therm 800 Handbuch Seite 69

Reset factory settings
FAC SET
The thermostat can be entirely reset to factory settings. All programmed
data is deleted and the start up menu is opened. If you choose to reset the
thermostat, it is important to know the operation mode it uses and the con-
figuration of the sensors.
The only way to change operation mode is to reset to the factory settings.
The reset function is in the under ; from here select
SYSTEM MENU RESET FAC
. This is preset to and is changed to by pressing and confirm-
SET NO YES
ing with .
33