Operation Mode Industry; Main Menu; Temperature Menu - EBECO EB-Therm 800 Handbuch

Operation mode Industry

Operation mode Industry is used to regulate the temperature of
industrial processes, high temperatures or for the frost protection of
sensitive installations. Temperatures within the ranges -15 °C to +75
°C and 0 °C to +150 °C can be regulated in this mode or the range
can be limited to between -10 °C and +15 °C for frost protection
purposes. It is also possible to adjust temperature hysteresis and
set upper and lower temperature alarms.

Main menu

MAIN MENU
The
MAIN MENU
.
SYSTEM
From display mode, go to the
buttons to move between the menus and confirm using
If you do not press a button for 30 seconds, the thermostat returns to dis-
play mode; you can also return to display mode by selecting
TEMP
TEMP
TEMP HYS
ALARMS
EXIT

Temperature menu

The temperature menu contains the functions that in some way concern direct tem-
perature regulation. This is where the set point, hysteresis and temperature alarm
are set. The temperature menu is reached via TEMP in the MAIN MENU.
Set point TEMP
The set point can be set to an accuracy of 0.5 degrees and is set in two overlapping
ranges. The lower temperature range is from -15 °C to +75 °C and the upper from 0 °C
to +150 °C. The factory setting is +40 °C or +100 °C depending on the temperature
range selected.
The set point setting is under TEMP in the TEMP menu. Set the required temperature
by pressing or
* Read more about temperature hysteresis and how to set it on page 23.
contains three submenus:
MAIN MENU
PROGRAM
LOW TEMP
HIGH TEMP
FROST PRO
EXIT
TEMP
and then confirm with
,
TEMPERATURE PROGRAM
by pressing once. Use the
.
EXIT.
SYSTEM EXIT
DISPLAY MODE
LANGUAGE
DATE/TIME
S/W TIME
SENSOR
RESET
EXIT
.
and
or
24