System Setting Menu - EBECO EB-Therm 800 Handbuch

Example: You want snow melting to be deactivated between 22:00 and
04:00 and between 11:00 and 15:00 every day, i.e. the installation shall be
active between 04:00–11:00 and 15:00–22:00. First select
. The first event is
EVENTS
at 15:00 and at 22:00.
ON OFF
RESET
There is also a reset function, which resets the program to the factory set-
ting, Max +2 °C and Min -10 °C, and deletes all the set events.

System setting menu

SYSTEM
Under system settings, you will find settings for, for example, language and
date, as well as resetting functions for the time counter and for complete
resetting to factory settings. The system settings are under
.
MAIN MENU
Language
LANGUAGE
You can choose between several languages; the factory setting is English.
Set the required language by scrolling through them using the
ton and confirm with
You can also use the shortcut in the display mode (press
onds). Then go directly to the language menu. A practical function if you,
by mistake, set the wrong language and then have difficulty finding the lan-
guage menu again.
Date and time
DATE/TIME
A set time and date can be changed if needed, for example, if the electrical
supply to the thermostat was disrupted for a period of more than fifty hours.
The setting function then comes up automatically.
The date and time setting is in the
Change the value that blinks with either
Summer and winter time
The thermostat calendar and clock are automatically set to summer and
winter time but the function can, if it is not required, be switched off.
Summer and winter settings are in the
. Switch off the function under
TIME
message is shown for a short time confirming that the function is switched
off. Activate the function in the opposite way by selecting
Sensor settings
SENSOR
The sensor settings are in the
the sensor you want to use by browsing with
at 04:00 and at 11:00. The second event is
ON OFF
.
MAIN MENU
or
S/W TIME
MAIN MENU
in the menu and select
ON/OFF
under
SYSTEM MENU
and then
WEEK
in the
SYSTEM
or
for three sec-
under and
SYSTEM DATE/TIME
and confirm with
under ; select
SYSTEM
OFF
.
ON
, and there select
SENSOR
or and confirm with
2
but-
.
.
S/W
, a
.
31