EBECO EB-Therm 800 Handbuch Seite 55

The programs are in the
browse using or and select using
tory setting, i.e. you set the required temperature (set point) and the ther-
mostat maintains that temperature.
Program for home environment
The temperature is raised by 5 °C at the following times:
Monday–Friday 08:30–15:00 and every day between 23:00–05:00.
The home environment program is under
using and a message is shown for two seconds to confirm that the
HOME
program has been activated. You can then see in display mode that the pro-
gram is active when
HOME
The temperature can be set between +5 °C and +45 °C. The thermostat works
from the temperature that is set in the manual program where the factory
setting is +22 °C. If you change the temperature in the manual program, or
set point in the menu, the thermostat works from the new temperature,
TEMP
and lowers the temperature by +5 °C from the new temperature.
Program for office environment
The temperature is raised automatically by 5 °C apart from at the following
times:
Monday–Friday 06:00–18:00.
The office environment program is under
using and a message is shown for two seconds to confirm that
OFFICE
the program has been activated. You can then see in display mode that the
program is active when
The temperature can be set between +5 °C and +45 °C. The thermostat works
from the temperature that is set in the manual program where the factory
setting is +22 °C. If you change the temperature in the manual program, or
set point in the menu, the thermostat works from the new temperature,
TEMP
and lowers the temperature by +5 °C from the new temperature.
Holiday program
HOLIDAY
This program is intended for protection against over heating of, for example,
electronic equipment in premises that are empty or unused for long periods,
such as holiday homes and storerooms, or longer periods of absence from
the normally used accommodation. The holiday program can be controlled
via a remote control unit. There are three menu alternatives to choose
between under
HOLIDAY
is under
HOLIDAY PROGRAM
between +20 °C and +40 °C; the factory setting is +27 °C.
under
MAIN MENU PROGRAM
. The manual program is the fac-
HOME
PROGRAM
is shown on the second row.
OFFICE
PROGRAM
is shown on the second row.
OFFICE
: , and
ACTIVATE CHANGE
in the . The temperature can be set
MAIN MENU
. To change program,
in the . Select
MAIN MENU
in the . Select
MAIN MENU
.
RESET
19