EBECO EB-Therm 800 Handbuch Seite 38

EB-Therm 800
Thank you for choosing Ebeco and EB-Therm 800, which we hope will
serve you well for a long time to come.
This is a microprocessor controlled thermostat intended for DIN installation
with a background lit LCD display. There are three operation buttons on the
front. There are four operation modes and several temperature reduction
programs to choose between for energy smart control. Furthermore, it is
possible to adapt the programming to fully suit your own temperature needs.
It is important to read the manual carefully since, for the guarantee to be
valid, the product must be installed and used in accordance with it. This
applies to both the installation electrician and the user of the thermostat.
The manual also contains information on fault tracing as well as technical
data. If you have any questions, please contact us at Ebeco.
Call 031-707 75 50 or send an e-mail to support@ebeco.se.
For more information, visit ebeco.com.
This is a high current unit and must therefore be installed according to
applicable regulations and be approved by an authorised electrician.