EBECO EB-Therm 800 Handbuch Seite 58

Summer and winter time
The thermostat calendar and clock are automatically set to summer and
winter time but the function can, if it is not required, be switched off.
Summer and winter settings are in the
. Switch off the function under
TIME
message is shown for a short time confirming that the function is switched
off. Activate the function in the opposite way by selecting
Sensor settings
SENSOR
The sensor settings are in the
the sensor you want to use by browsing with
The thermostat works as a Room thermostat and measures the temperature
using a room sensor. When the thermostat is used to regulate cooling, the
room sensor can be installed either as
sensor at a time, but if there are two sensors installed you can switch be-
tween and .
A B
Adaptive function
ADAPTIVE
The thermostat has a function that calculates when heating should be start-
ed to provide the required temperature at the right time. The function is
activated on delivery, but can be switched off as required.
You will find the settings for adaptive function in the
, and there you select
SYSTEM
in the menu and select
that the function is switched off. Activate the function in the opposite way
by selecting .
ON
Ventilation mode
VENT
If the room temperature increases by more than 3 °C in a minute, for example,
when airing, ventilation mode is activated. The thermostat then deactivates
heating for 15 minutes, after which it returns to the same setting; ventilation
mode shows in the display when it is activated. The function is activated on
delivery, but can be switched off as required.
You will find the settings for adaptive function in the
, and there you select
SYSTEM
in the menu and select
that the function is switched off. Activate the function in the opposite way
by selecting .
ON
Reset
RESET
There are three choices under the reset menu:
. You will find the
SET RESET
S/W TIME
MAIN MENU
in the menu and select
ON/OFF
menu under
SYSTEM
or . It is only possible to use one
A B
. Switch off the function under
ADAPTIVE
, a message is shown for a short time confirming
OFF
. Switch off the function under
ADAPTIVE
, a message is shown for a short time confirming
OFF
menu under
SYSTEM
under ; select
SYSTEM
OFF
.
ON
, and there select
SENSOR
or and confirm with
under
MAIN MENU
ON/OFF
under
MAIN MENU
ON/OFF
, and
CONN TIME OP MODE
in the .
MAIN MENU
S/W
, a
.
FAC
22