System Setting Menu - EBECO EB-Therm 800 Handbuch

System setting menu

SYSTEM
Under system settings, you will find settings for, for example, language and date, as
well as resetting functions for the time counter and for complete resetting to factory
settings. The system settings are under SYSTEM in the MAIN MENU.
Language LANGUAGE
You can choose between several languages; the factory setting is English.
Set the required language by scrolling through them using the
confirm with .
You can also use the shortcut in the display mode (press
Then go directly to the language menu. A practical function if you, by mistake, set
the wrong language and then have difficulty finding the language menu again.
Date and time DATE/TIME
A set time and date can be changed if needed, for example, if the electrical supply
to the thermostat was disrupted for a period of more than fifty hours. The setting
function then comes up automatically.
The date and time setting is in the MAIN MENU under SYSTEM and DATE/TIME.
Change the value that blinks with either
Summer and winter time
The thermostat calendar and clock are automatically set to summer and winter time
but the function can, if it is not required, be switched off.
Summer and winter settings are in the MAIN MENU under SYSTEM; select S/W
TIME. Switch off the function under ON/OFF in the menu and select OFF, a mes-
sage is shown for a short time confirming that the function is switched off. Activate
the function in the opposite way by selecting ON.
Sensor settings SENSOR
The thermostat uses external sensors that can be installed either asA or B. It is only
possible to use one sensor at a time, but if there are two sensors installed, you can
switch between A and B.
The sensor settings are in the SYSTEM MENU under SENSOR, and there select the
sensor you want to use by browsing with
or and confirm with
S/W TIME
or and confirm with
or button and
for three seconds).
.
.
27