Device" / "Extras" Menu - Sartorius Entris II Essential Line BCE224 Betriebsanleitung

Parameter Setting values
DATABIT** 7 BITS
8 BITS*
DEV.USED NONE*, PRINTER,
VIRT.COM, PC
HOST, REM.DISP.
* Factory setting
** Are blocked if "PRINTER" or "REM.DISP." are displayed under "DEV.USED"
7.3.5

"DEVICE" / "EXTRAS" Menu

Parameter Setting values
MENU EDITABL.*
RD.ONLY
SIGNAL OFF
ON*
KEYS UNLOCK.*
LOCKED
EXT.KEY PRINT
CAL.
CF
ENTER
ZERO
TARE
GLP END
NO*
ON MODE ON/STDB.*
ON/OFF
AUTO ON
OFF
LIGHT
ON*
* Factory setting
Explanations
Sets the number of data bits to 7.
Sets the number of data bits to 8.
Indicates which connection is detected at the USB port.
Explanation
Activates write access. The menu parameters can be changed.
Activates read access. The menu parameters cannot be changed.
Switches the acoustic signal off.
Switches the acoustic signal on.
Deactivates the button lock.
Activates the button lock.
Assigns the print function to the external key.
Assigns the calibration and adjustment function selected under [CAL./ADJ.]
to the external key.
Assigns the [Back] function to the external key.
Assigns the [Confirm] function to the external key.
Assigns the [Zero] function to the external key.
Assigns the [Tare] function to the external key.
Assigns the [GLP] function to the external key.
No function is assigned to the external key.
The [On/Off] button switches between on / standby with time.
The [On/Off] button switches between on / standby without time..
Changes the function of the [On/Off] button: The device no longer switches
off or to standby mode, instead it starts a boot process.
Deactivates the lighting on the operating display.
Activates the lighting on the operating display.
System Settings
Entris BCE Operating Instructions
®
25