Toggle Between Weight Units; Menu Structure; Navigating The Menus - Sartorius Entris II Essential Line BCE224 Betriebsanleitung

Operating Concept
Level 1 Level 2
INPUT DEV.ID.
LOT ID
SPL. ID
DATE
TIME
USER.PW
SERV.PW
CAL. WT.
"Calibration weight"
INTERV.
INFO VERSION
"Device "Version number"
information"
SER. NO.
"Serial number"
MODEL
BAC VER.
LANGUAGE
4.4.2 "Toggle Between Weight Units" Menu Structure
Navigating in menus (see Kapitel 4.5, Seite 16).
t
Level 1 Description
Unit 1 - unit 4 Define the displayed weight unit and the resolution for the 1st to 4th convertible unit.
4.5

Navigating the Menus

Procedure
To open the main menu: Press the [Menu] button.
t
To display menu items or parameters of a level: Press the [Up] or [Down] button.
t
To return to the next higher menu level or exit the menu: Press the [Back] button.
t
To open a displayed menu level or a displayed parameter: Press the [Confirm] button.
t
16 Entris BCE Operating Instructions
®
Description
Save the entered ID number for the device.
Activate or deactivate the printout of a line for the LOT ID in the
GLP printout. It is possible to enter a LOT ID number or the LOT ID
can be manually entered in the line.
— Activate or deactivate the printout of a line for the SPL. ID in the
GLP printout.
— The entered ID number can be counted up or down with each
sample.
Set the date.
Set the time.
Set the user password.
Activate the service mode.
Define the user-defined weight value for the calibration and
adjustment weight.
The SBI output rate can be set from 0 - 9999 seconds.
Display the software version number.
Display the device's serial number.
Display the device's model ID.
Display the version of the BAC processor.
Set the menu language of the operating display.