Explosion Protection; Personnel Qualification; Significance Of These Instructions; Proper Working Order Of The Device - Sartorius PMA.Evolution EVO1Y1 Installationsanleitung

Any further use beyond this is considered improper. If the
device is not used properly: The protective systems of the
device may be impaired. This can lead to personal injury and
property damage.
In the event of use in systems and ambient conditions which
have greater safety requirements, you must observe the
requirements and provisions applicable in your country.
Operating Conditions for the Device
The device may only be used indoors.
Only use the device with the equipment and under the
operating conditions described in the Technical Data.
Do not modify the device or make any technical changes.
Do not expose the device or accessories supplied by Sartorius
to extreme temperatures, aggressive chemical vapors,
moisture, shock, vibrations, or strong electromagnetic fields.
Observe the operating conditions described in the Technical
Data section.
The casing on all connection cables between the devices as
well as on the wires inside the device housing is made of PVC.
Chemicals that corrode this material must be kept away from
these cables.

2.2 Explosion Protection

Use within the scope of validity of the European ATEX
Directive:
− In accordance with Directive 2014/34/EU, the EVO1Y1
model is a category 3 device, suitable for use in Zone 2
potentially explosive areas.
− Refer to the EU Type Examination Certificates from
page 59 in Section "18.2 Explosion protection approvals"
for the device ID codes.
− Please observe the safety instructions in drawing 2021460
from page 59.
Use in Australia/New Zealand:
− Please observe IECEx Certificate of Conformity IECEx FME
15.0004X and the Safety Instructions in drawing 2021460
from page 59.

2.3 Personnel Qualification

These instructions are addressed to the target groups
mentioned below. All persons working on the device must
possess the stated knowledge and authorizations.
If no qualifications are indicated for the actions described in
these instructions: The actions described are addressed to the
"User" target group.
4 Installation Instructions EVO1Y1
If individual actions must be carried out by other target
groups or by Sartorius Service personnel: The qualification
required will be indicated in the description of the action.
Target Knowledge/authorizations
group
User The user is familiar with the operation of the
device and the associated work processes. They
understand the hazards which may arise when
working with the device and can avoid these
hazards.
The user is trained in the operation of the
device. Training takes place during startup and
is carried out by the operating engineer/
laboratory manager or the operator of the
device.
Operating The operating engineer/laboratory manager
engineer/ makes decisions about the use and
laboratory configuration of the device.
manager The operating engineer/laboratory manager is
trained in the operation of the device. Training
takes place during startup and is carried out by
Sartorius Service or the operator.
Electrician A qualified electrician has the specialized
training, knowledge, and experience as well
as familiarity with applicable regulations to
evaluate the assigned work and identify possible
hazards.
Operator The device operator is responsible for ensuring
compliance with workplace health and safety
regulations.
The operator must ensure that anyone working
with the device has access to the relevant
information and is trained to work with the
device.

2.4 Significance of these Instructions

Failure to follow the instructions in this manual can have
serious consequences, e.g., exposure of individuals to
electrical, mechanical, or chemical hazards.
Before working with the device: Read the instructions
t
carefully and completely.
If these instructions are lost: Request a replacement or
t
download the latest version from the Sartorius website
(www.sartorius.com).
The information contained in these instructions must be
t
available to all individuals working on the device.

2.5 Proper Working Order of the Device

A damaged device can cause malfunctions or lead to hard-to-
detect hazards.