About These Instructions; Scope; Other Applicable Documents; Target Groups - Sartorius Entris II Essential Line BCE224 Betriebsanleitung

1 About these
Instructions
1.1

Scope

These instructions are part of the device. These
instructions apply to the device in the following versions:
Device
Entris BCE analytical
®
balance with manual
analytical draft shield,
readability of 0.1 mg
Entris BCE precision
®
balance with manual
analytical draft shield,
readability of 1 mg
Entris BCE precision
®
balance with round glass
draft shield, readability
of 1 mg
1) Country-specific marking in model, x =
S Standard balances without country-specific
additions
SAR Standard balances with country-specific
additions for Argentina
SJP Standard balances with country-specific
additions for Japan
SKR Standard balances with country-specific
additions for South Korea
OBR Balances with approval for Brazil
OIN Balances with approval for India
OJP Balances with approval for Japan
ORU Balances with approval for Russia
CCN Balances with approval for China
CEU Conformity-assessed balances with EU type
examination certificate without country-
specific additions
CFR Conformity-assessed balances with EU type
examination certificate only for France
NUS Balances with approval for USA and Canada
Model
1) 2)
BCE224I-1x | BCE224-1x |
BCE124I-1x | BCE124-1x |
BCE64I-1x | BCE64-1x
BCE623I-1x | BCE623-1x |
BCE423I-1x | BCE423-1x |
BCE323I-1x | BCE323-1x |
BCE223I-1x | BCE223-1x
BCE653I-1x | BCE653-1x

About these Instructions

2) Model-typical marking in model
I-1x Devices with internal calibration and adjust-
ment function
1.2

Other Applicable Documents

In addition to these instructions, observe the following
documentation:
— Installation instructions for the accessories, e.g.
printer
1.3

Target Groups

These instructions are addressed to the following target
groups. The target groups must possess the specified
knowledge.
Target group Knowledge and qualifications
User The user is familiar with the operation
of the device and the associated
work processes. They understand the
hazards which may arise when
working with the device and know
how to prevent them.
They have been trained in the
operation of the device.
Target group Knowledge and qualifications
Operator The operator of the device is
responsible for ensuring compliance
with workplace health and safety
regulations.
The operator must ensure that all
persons who work with the device
have access to the relevant
information and are trained in
working with the device.
Entris BCE Operating Instructions
®
5