Applic." / "Count" Menu; Applic." / "Percent" Menu; Applic." / "Net.tot." Menu; Applic." / "Total" Menu - Sartorius Entris II Essential Line BCE224 Betriebsanleitung

System Settings

7.3.10 "APPLIC." / "COUNT" Menu

Parameter Setting values
RESOLUT. DISP.ACC.*
10-FOLD
100.FOLD
REF.UPDT. OFF*
AUTO
* Factory setting
7.3.11

"APPLIC." / "PERCENT" Menu

Parameter Setting values
DEC.PLCS NONE
1 DEC.PL.*
2 DEC.PL.
3 DEC.PL.
* Factory setting
7.3.12

"APPLIC." / "NET.TOT." Menu

Parameter Setting values
PRT.COMP. OFF
ON*
* Factory setting

7.3.13 "APPLIC." / "TOTAL" Menu

Parameter Setting values
PRT.COMP. OFF
ON*
* Factory setting
28 Entris BCE Operating Instructions
®
Explanation
Sets the resolution to "display resolution". The "Counting" application is
started with the displayed value.
Sets the resolution to 10-times more accurate than "display resolution".
Sets the resolution to 100-times more accurate than "display resolution".
Deactivates automatic reference sample updating.
Activates the automatic reference sample updating.
Explanation
The result of the "Weighing in Percent" application is displayed without dec-
imal places.
The result of the "Weighing in Percent" application is displayed to 1 decimal
place.
The result of the "Weighing in Percent" application is displayed to 2 decimal
places.
The result of the "Weighing in Percent" application is displayed to 3 decimal
places.
Explanation
Deactivates the component printout.
Activates the component printout.
Explanation
Deactivates the component printout.
Activates the component printout.