Sartorius Entris II Essential Line BCE224 Betriebsanleitung Seite 14

Operating Concept
Symbol Designation
[Sign] display
[Zero] display
[AUTO] display
[Application help]
display
[R12] display
[Printer] display
[PC-Connect]
display
[Percent] display
[Net] display
[Gross] display
[Selection]
display
[Unit symbol]
display
[Quantity]
[Invalid weight
value] display
14 Entris BCE Operating Instructions
®
Description
Indicates whether the value being displayed is positive or negative.
For some conformity-assessed devices: Indicates that the device has been
zeroed.
Indicates that the "Animal weighing" application starts automatically.
— Indicates the number of components for "Totalizing", "Net total", and
"Statistics".
— Indicates the minimum limit "LL" and the maximum limit "HH" during
"Checkweighing".
Indicates the active range for multi-range balances.
— Indicates that a printer has been detected at the USB port.
— Flashes if the data output is active.
— Indicates that a PC or a second display has been detected at the USB port.
— Flashes if the data connection is active.
Indicates that a percentage value is being displayed.
Indicates that a net value is being displayed.
Indicates that a gross value is being displayed.
In the menu: Identifies the selected parameter.
If the "Calculation" or "Density determination" application is active: Indicates that
a calculated value is being displayed.
Indicates the set weight unit, e.g. [g] for "grams".
Indicates that a quantity is being displayed.
— Indicates that the display does not contain a weight value, but is instead the
calculated result of an application, e.g. for the "Totalizing" application.
— For conformity-assessed devices: Indicates a fault. The cause of this fault is
displayed after pressing the [Change] key.