Special Accessory Installation - Truma Mover XT Gebrauchsanweisung

Special accessory installation

1. 30 mm spacer set
For compensating for height on caravans / trailers with a
frame height of < 140 mm down to 110 mm,
part no. 60030-95000.
Figure 9
2. 60 mm spacer set
For compensating for height on caravans / trailers with a
frame height of < 110 mm down to 80 mm,
part no. 60030-95100.
Figure 10
3. Low chassis kit
For compensating for height on caravans / trailers with a
frame height of less than 80 mm and / or for bridging struts,
part no. 60010-64900.
Figure 11
If this installation kit is used in Germany, acceptance
by a vehicle expert is required.
4. Low chassis kit, short
Figure 12
For compensating for height on caravans / trailers with
a frame height of less than 80 mm,
part no. 60030-37600.
If this installation kit is used in Germany, acceptance
by a vehicle expert is required.
5. AL-KO Vario III / AV installation kit
Essential for caravans with AL-KO Vario III / AV chassis
(frame thickness less than 2.8 mm),
part no. 60010-21500.
Figure 13
6. AL-KO chassis M adapter set for chassis with an off-
set axle and a permitted gross weight of up to 1800 kg
Mounting set for compensating for frame edges for caravans
with AL-KO chassis M. The mounting set is needed for mount-
ing in front of the axle,
part no. 60030-38600.
Figure 14
7. AL-KO chassis M adapter set for chassis with a con-
tinuous frame and a permitted gross weight of 1900 kg
to 2000 kg
Mounting set for compensating for frame edges for caravans
with AL-KO chassis M. The mounting set is needed for mount-
ing in front of the axle,
part no. 60031-02000.
Figure 15
8. Mover® mounting set for Eriba Touring
Part. no. 60030-09000
Figure 16
9. Mounting set Eriba Troll
Part. no. 60031-03000
The Eriba Troll mounting set allows the Mover® to be mounted
behind the axle on an Eriba Troll caravan / trailer.
Figure 17
23