Adjusting Stroke, Lift And Rotate Speed - Bosch Rexroth HD 2 Montageanleitung


If necessary, adjust the
stroke (40 or 90 mm)
by moving the damping
ring (A).
Please note:
• Before setting the
stroke speed, mount
the WT workpiece pallet
(with working load).
• On delivery, the setting
achieves an even,
smooth lifting and rotary
movement of the lift rotate
unit.

To adjust the speed
of the lifting or rotary
movement, throttle the
supply and exhaust air
(see also page 21,
Fig. 9).
• Rotate in the "+" direction
The movement is slower.
• Rotate in the "–" direction
The movement is faster.
Function of the throttles
B: Counterclockwise
rotation supply air
B : Counterclockwise
1
rotation exhaust air
C: Clockwise rotation
supply air
C : Clockwise rotation
1
exhaust air
D: Lowering supply air
E: Lifting supply air
F: End position damping
lifting movement

8.4 Adjusting stroke, lift and rotate speed

Sudden movements
Risk of severe injury or death.

Initial commissioning must be carried out without the lifting plate.

Final commissioning may only be performed with protective devices in place.
These must be provided by the customer.

Do not leave objects on the lift rotate unit.
A
Fig. 11: Adjusting stroke, lift and rotate speed
Commissioning
WARNING
F
3 842 358 735/2019-10, MIT: HD 2, Bosch Rexroth AG
27/38
B
1
B
C
C
1
D
+
–
E
358 735-14