Symbols - Bosch Rexroth HD 2 Montageanleitung

6/38 About this documentation
Bosch Rexroth AG, MIT: HD 2, 3 842 358 735/2019-10
Safety instructions are set out as follows:
Type and source of danger!
Consequences of non-compliance

Measures to prevent danger

...
• Warning sign: points out the danger
• Signal word: indicates the severity of the danger
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes the consequences of non-compliance
• Prevention: states how the danger can be avoided
Table 2: Risk classes according to ANSI Z535.6-2006
Safety sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2

Symbols

The following symbols indicate important information that is not safety-relevant but
increases the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated as designed.

Single, independent action
1. Numbered steps:
2. The numbers indicate that the action steps are subsequent.
3.
SIGNAL WORD
Meaning
Indicates a hazardous situation that will result in severe
injury or death if not avoided.
Indicates a hazardous situation that may result in severe
injury or death if not avoided.
Indicates a hazardous situation that may result in minor to
moderate injury if not avoided.
Property damage: the product or the surrounding area could
get damaged.