Personnel Qualifi Cations; General Safety Instructions - Bosch Rexroth HD 2 Montageanleitung

8/38 Safety instructions
Bosch Rexroth AG, MIT: HD 2, 3 842 358 735/2019-10
The following foreseeable misuses also constitute improper use:
• Transporting goods other than those specifi ed.
• Using the product without a guard to prevent the user's hands from reaching into
the product.
• Using the product in accumulation operation.
• Transporting people on the product or transported material.
• Climbing onto the product.
- the product is not accessible.
• Private use.
2.4 Personnel qualifi cations
The activities described in this document require basic knowledge of mechanical,
electrical and pneumatic systems, as well as familiarity with the corresponding
technical terms. Additional knowledge regarding the use of lifting gear and
corresponding slings is required for transporting and handling the product.
To ensure safe use, these activities should therefore only be performed by qualifi ed
personnel or by an instructed person acting under the direction of such a person.
"Qualifi ed personnel" refers to those who can recognize potential hazards and
take appropriate safety measures based on their technical training, knowledge,
experience, and understanding of the relevant regulations pertaining to the work
being performed. Qualifi ed personnel must comply with the relevant technical
regulations and have the necessary expertise.
Bosch Rexroth offers training support for specialized fi elds. You can fi nd an
overview of the training content online at: http://www.boschrexroth.de/didactic

2.5 General safety instructions

• As owner, please note the following: before the initial commissioning of the
product, carry out a risk assessment in accordance with the national regulations
in your country (in Germany: according to the Occupational Health and Safety Act).
• As distributing company/manufacturer of the machine, observe the following:
Before the initial commissioning of a conveyor system, conduct a risk assessment
in accordance with DIN EN ISO 12100.
• Observe the applicable accident prevention and environmental protection
regulations.
• Observe the safety rules and regulations of the country in which the product is
being used.
• Only use Rexroth products that are in proper working order.
• Heed all the notices on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products should
not be under the infl uence of alcohol, drugs or medication that may affect their
ability to respond.
• Use only original accessories and spare parts from Rexroth in order to prevent
hazards to people due to unsuitable spare parts.
• Observe the technical data and ambient conditions specifi ed in the product
documentation.
• Only commission the product if it has been determined that the end product
(for example, a machine or system) into which the Rexroth products have been
installed complies with national provisions, safety regulations and application
standards.