Identifi Cation Of The Product; Transport And Storage; Transporting The Product; Storing The Product - Bosch Rexroth HD 2 Montageanleitung

A: Material number
(order number)
B: Designation
C: Information on
the version and
dimensions
5.5 Identifi cation of the product
. . .
. . . . . . . .
Fig. 3: Nameplate

6 Transport and storage

• Observe the transport instructions on the packaging.
• Transport weight: see delivery documents.
• Secure the product against tipping over!
• Always maintain ambient conditions during loading and transport, see page 37.

6.1 Transporting the product

Suspended loads can fall!
Falling objects can result in severe injury (or even death).

Use only slings with suffi ciently high bearing loads (for product weight,
see delivery documents).

Make sure the lifting straps are correctly fastened before lifting the product!

Secure the product against tipping over when lifting!

Make sure that no one but the operator is in the danger zone during lifting and
lowering!

6.2 Storing the product

• Only set the product down on a fl at surface.
• Protect the product from mechanical stress.
• Protect the product from environmental infl uences, such as dirt and moisture.
• Observe the ambient conditions, see page 37.
• Support the product so that suspended motors/actuators/cylinders will not be
strained.
Transport and storage
A
. . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . .
C
WARNING
3 842 358 735/2019-10, MIT: HD 2, Bosch Rexroth AG
13/38
B
. . . .
. . . .
Typschild