Receiving The Product; Transporting The Product; Handling And Lifting The Product - Grundfos AP80-100 Montage- Und Betriebsanleitung

2.1.3 Identification
Nameplate
Fix the extra nameplate supplied with the pump at the
installation site or keep it in the cover of this booklet.
1
Type
Model No.
Hmax Qmax
2
n min
-1
8
Motor ~ Hz
11
P1/P2
14
V A
17
DK-8850 Bjerringbro,Denmark
18 15
Pos. Description
1 Type designation
2 Maximum head [m]
3 Product number
4 Maximum liquid temperature [°C]
5 Production code, year and week
6
Maximum flow rate [m
7 Maximum installation depth [m]
8 Speed [rpm]
9 Net weight [kg]
10 Enclosure class
11 Phase
12 Frequency [Hz]
13 Insulation class
14 Motor input power P1 [kW]
15 Motor input power P2 [kW]
16 Cos φ, 1/1 load
17 Rated voltage [V], delta connection
18 Rated current [A], delta connection
19 Rated voltage [V], star connection
20 Rated current [A], star connection
3 6 5
Date
Temp. ºC
m³/h
kg IP68
Insul. class
kW cos Ф
V Y A
Made in
DE
Germany
9 12 19
3
/h]
Type key
Fix the extra nameplate supplied with the pump at the
installation site or keep it in the cover of this booklet
Example: AP80.80.13.3.V
Code Description
Wastewater/
AP
sewage pump
4
7
Maximum
10
80 solids size 80 =
13
80 mm
16
Nominal outlet
20
80 diameter 80 =
80 mm
Output power
13
P2 07 = 0.7 kW
Single-phase
1
motor
Three-phase
3
motor
Single-channel
1
impeller
V Vortex impeller
Custom-built
Z
products

3. Receiving the product

3.1 Transporting the product

The pump can be transported and stored in vertical
or horizontal position. Make sure it cannot roll or fall
over. Make sure that the received product
corresponds to the order. In case of damage or
missing parts, inform the transport company or the
manufacturer immediately.

3.2 Handling and lifting the product

All lifting equipment must be rated for the purpose
and checked for damage before lifting the pump. The
lifting equipment rating must not be exceeded. The
pump weight is stated on the nameplate.
Explanation
Pump type
Pump passage
Pump outlet
Power [kW]
Number of
phases
Impeller type
Customisation
7