The Drive Mode - Bosch Servodyn-ASC Betriebshandbuch

Servodyn - ASC
Drive Mode
4.6 Drive Mode
GB
4.6.1 Adjustment
Possibilities
4.6.2 Condition
4.6.3
Display and Keyboard
4.6.4
Setvalue Display /
Setvalue presetting
GB - 50
The Drive Mode is a special operating mode in BOSCH ASC. It allows
an easy manual start-up. To activate the Drive Mode enter the
respective Password in CP.0.
The passwords are discribed in chapter 4.10 !
- Stop / Start / Run
- Setpoint value
- Direction of rotation
Control release must be activated (terminal X2.1).
When the functions rotation release (terminal X2.3/ X2.4)
and analog torque control (terminal X2.16/ X2.17) are
activated, they still don`t have a function in the Drive Mode.
Rotation Indicator
Decrease
setvalue
START
ENTER FUNC.
F/R SPEED
STOP
Hold the SPEED- key pressed
down and decrease the indicated
setvalue with the STOP- key.
START
ENTER FUNC.
F/R SPEED
STOP
The defined setvalue is displayed
until the SPPED- key is pressed.
START
Increase
ENTER FUNC.
set value
F/R SPEED
STOP
Setvalue:
0 - max. 6000 rpm
ENTER
F/R
Hold the SPEED- key pressed
down and increase the indicated
setvalue with the START- key.
Displays Operating Mode/
Actual speed/ set speedl
Operation / Error display
No error "LED on"
Error "LED blinks"
Operator Panel
START
FUNC.
SPEED
STOP
1070066022 - 101