Servodyn - ASC
General
1.7 Application
GB
1.8 Moving or rotating
1.8
1.8
1.8
1.8
Moving or rotating
Moving or rotating
Moving or rotating
Moving or rotating
Parts
Parts
Parts
Parts
Parts
1.9
1.9
High Operating
High Operating
1.9 High Operating
1.9
1.9
High Operating
High Operating
Temperatures
Temperatures
Temperatures
Temperatures
Temperatures
° C
100
0
1.10
1.10
1.10
1.10
1.10 Operating Instructions
Operating Instructions
Operating Instructions
Operating Instructions
Operating Instructions
GB - 10
The frequency inverter BOSCHASC is a drive component, which is
intended for installation in electrical systems or machines. The
frequency inverter is exclusively for stepless speed control/
regulation of three-phase asynchronous motors. The operation of
other electrical consumers is not permitted and can lead to the
destruction of the unit.
•
Motor shaft
•
Feed axis and parts connected to it
Prior to any work on the machine (e.g.
exchange of tools), disconnect it and secure
against unintended restart!
Safely secure movement range of machine
during operation! Danger of injury!
•
Housing of the motor
•
Braking resistors
Motor housing and braking resistor can attain
very high temperatures! Danger of injury!
To avoid premature ageing and/or destruction of the
frequency inverter BOSCH ASC, observe the
following instructions!
–
Install an isolating switch between the voltage supply and inverter,
so that BOSCH ASC can shut off independently.
–
Frequent switching between mains and inverter is not permitted!
–
Switching between motor and inverter during operation is
prohibited!
–
The BOSCH ASC is to be operated under suitable conditions
(see Ambient Conditions).
1070066022 - 101