Bosch Servodyn-ASC Betriebshandbuch Seite 112

Aux Function
1070066022 - 101
In Parameter CP.36 you can adjust on which parameter the 2nd analog
input REF2 (X2.16 / X2.17) should work. During open loop operation
values 2, 3, 4 and 5 do not have a function !
Adjustment Range:
Resolution:
Factory setting:
Factor 1 or CP.10
(see table)
Value Function Analog Input REF2
0 no function
1 adds to the setpoint (has no influence on the jogging
operation)
2 works as a multiplier for parameter CP.12 (P-factor of the
speed controller)
3 works as a multiplier for parameter CP.13 (I-factor of the
speed controller)
4 works as a multiplier for CP.12 + CP.13 (total gain of the
speed controller)
5 works as a multiplier for parameter CP.9 (torque limit)
Parameter Adjustment
0 ... 5
1
0
n [rpm]
U [V]
(REF 2)
0 +10
Servodyn - ASC
10 V = CP.10
10 V = gain 1
10 V = gain 1
10 V = gain 1
10 V = gain 1
GB - 47
GB