Installation; Installing The Computer Module; Connecting The Computer's Kvm Interfaces - G&D LwLVision-USB 2.0 Installationsanleitung

Installation

Installing the computer module

The computer, whose signals are transmitted to the remote console, is connected to
the LwLVision-PC computer module. A local console can optionally be connected to
the computer module.

Connecting the computer's KVM interfaces

RS 232 Line In Line Out
Trans.
Service Tx Rx
DVI/VGA CPU: Connect the computer's video output to this interface.
If the computer provides a digital DVI interface, use the digital video cable
(DVI-D-SL-M/M-2).
Use the analog video cable (VGA-M/DVI-A-M-2) for an analog VGA interface.
NOTE: Mouse and keyboard signals of both consoles can be transmitted to the
computer via USB or PS/2 interfaces.
USB Keyb./Mouse CPU:
USB ports to this interface.
PS/2 Keyb./Mouse CPU:
interface.
Connect the keyboard plug of the connection cable to the computer's purple
PS/2 keyboard interface.
Connect the mouse plug of the connection cable to the computer's green
PS/2 mouse interface.
6 · G&D LwLVision-USB 2.0
Keyb. PS/2 Keyb./Mouse CPU
Mouse PS/2
DVI/VGA Out DVI/VGA CPU
Use the USB-AM/BM-2 cable to connect one of the computer's
Connect the PS/2 connection cable (SOKA-G-2 ) to this
USB USB 2.0 Trans. USB 2.0 CPU
Tx Rx
Red. Power