Maintenance, Cleaning And Recalibration; Maintenance - WIKA CPH6300 Betriebsanleitung

6. Faults / 7. Maintenance, cleaning and recalibration
Display
Err.1
Err.2
Err.3
Err.4
Er.11
Err.7
----

7. Maintenance, cleaning and recalibration

Personnel: Skilled personnel
Protective equipment: Protective gloves and safety goggles
Tools: Cross-head screwdriver, spanner or torque spanner

7.1 Maintenance

The model CPH6300 hand-held pressure indicator and the associated CPT6200
reference pressure sensors are maintenance-free.
Repairs must only be carried out by the manufacturer.
WIKA operating instructions, model CPH6300
Downloaded from www.Manualslib.com
Meaning
Measured value above allowable
range
Sensor defect
Measured value below allowable
range
Sensor defect
Scale range exceeded
Under the scale range
Measured value could not be
calculated
Calculation range exceeded
System error
Sensor not present / recognised
Display value cannot be calculated
For contact details see chapter 1 "General information" or the back page of
the operating instructions.
manuals search engine
Remedy
Check: Is the pressure over the
permissible one? Measuring range of
the sensor?
⇒
Measured value too high!
Send in for repair
Check: Is the pressure under the
permissible measuring range of the
sensor?
⇒
Measured value too low!
Send in for repair
Check: Is the value above 19999?
⇒
Measured value too high!
Check: Is the value below -19999
(Tare?)
⇒
Measured value too low!
Choose different unit
Choose different unit
Send in for repair
Plug in inserted sensor once more,
with running recording, stop the
logger and re-start it
Plug in appropriate sensor
combination
EN
33