WIKA CPH6300 Betriebsanleitung Seite 40

9. Specifications
Digital indicator model CPH6300
Permissible ambient conditions
Operating temperature
EN
Storage temperature
Relative humidity
Communication
Interface
Analogue output
Case
Material
Ingress protection
Electrical connection
Dimensions
Weight
Reference pressure sensor model CPT6200
Pressure connection
Material
Wetted parts
Internal transmission fluid
{} Items in curved brackets are optional extras for an additional price.
3) For pressure measuring ranges 0 ... 25 mbar, 0 ... 40 mbar and 0 ... 60 mbar (0 ... 0.4 psi, 0 ... 0.6 psi and 0 ... 0.9 psi) all wetted
parts are made of stainless steel, silicium, aluminium, gold, silicone.
4) As an oxygen version, a flush diaphragm model is not available. In an oxygen version, the model CPT6200 is only available in
overpressure ranges ≥ 0.25 bar (≥ 0.4 psi), with media temperatures between -10 ... +50 °C (14 ... 122 °F) and using stainless
steel or Elgiloy
40
Downloaded from www.Manualslib.com
-25 ... +50 °C (-13 ... +122 °F)
-25 ... +70 °C (-13 ... +158 °F)
0 ... 95 % r. h. (non-condensing)
USB via interface cable
DC 0 ... 1 V; configurable (selectable via menu alternative to interface)
impact-resistant ABS plastic, membrane keyboard, transparent
screen, silicone protective casing
IP65, IP67 (both ingress protection types are met)
Sensor cable: Bayonet connector, 7-pin
Interface connector: Bayonet connector, 4-pin
See technical drawings
approx. 250 g (0.55 lbs) (incl. batteries and protective casing)
4)
G ½ B; {flush (G 1 for 0.1 ... 1.6 bar (1.5 ... 25 psi)) or various
connection adapters on request}
Stainless steel or Elgiloy
NBR seal)
Flush diaphragm version: Stainless steel {Hastelloy C4}; O-ring:
NBR {FKM/FPM or EPDM}
Synthetic oil (only for measuring ranges to 16 bar (250 psi) or
flush diaphragm)
{Halocarbon oil for oxygen applications}; {Listed by FDA for food
industry}
®
wetted parts.
manuals search engine
®
, (> 25 bar (360 psi) additionally with
3)
WIKA operating instructions, model CPH6300