WIKA CPH6300 Betriebsanleitung Seite 18

5. Commissioning, operation
Menu Parameters
"MENU"
OFS.2
EN
SCL.2
Set Alarm: Alarm function configuration
SET
AL.
AL.Lo/1
AL.Hi/1
AL. 2
AL.Lo/2
AL.Hi/2
DIF
1) Menu cannot be selected if there is data in the logger memory. If this is to be changed, the data must first be deleted (see chapter
5.5 "Data logger").
2) This menu can only be selected if an appropriate sensor is connected to connection 1. When using a second corresponding
sensor on connection 2 then the settings are adopted.
3) Only for 2-channel version
18
Downloaded from www.Manualslib.com
Values
▶ ▲ or ▼
Zero point adjustment/offset of sensor 2
oFF
sensor
dependent
e.g. -5.00 ...
5.00 mbar
Slope correction for sensor 2
oFF
-2,000 ...
2,000
On/No.So
OFF
Sensor1-Min
... AL.1-Hi
AL.1-Lo ...
Sensor1-Max
On/No.So
OFF
Sensor2-Min
... AL.2-Hi
AL.2-Lo ...
Sensor2-Max
On/No.So
AL.
OFF
manuals search engine
Meaning
No zero point adjustment for sensor 2.
The zero point of sensor 2 will be displaced by
this value to compensate for deviations in the
probe or in the measuring instrument.
No slope correction for sensor 2
The measuring scale will be changed by this
factor [%] to compensate deviations of probe and
measuring instrument.
Alarm sensor 1 on, with buzzer/without buzzer
No alarm function for sensor 1
Min alarm limit sensor 1 (not if AL.1 = oFF)
Sensor1-Min is the lower scale range limit of
sensor 1.
Max alarm limit sensor 1 (not if AL.1 = oFF)
Sensor1-Max is the upper scale range limit of
sensor 1.
Alarm sensor 2 on, with buzzer/without buzzer
No alarm function for sensor 2
Min alarm limit sensor 2 (not if AL.2 = oFF)
Sensor1-Min is the lower scale range limit of
sensor 2.
Max alarm limit sensor 2 (not if AL.2 = oFF)
Sensor1-Max is the upper scale range limit of
sensor 2.
Alarm on, with/without buzzer (1-channel version)
or alarm sensor difference on, with/without
buzzer (2-channel version).
no alarm function (1-channel version) or no
alarm function for sensor difference (2-channel
version.)
WIKA operating instructions, model CPH6300