Commissioning, Operation; Operation; Display - WIKA CPH6300 Betriebsanleitung

4. Transport, packaging ... / 5. Commissioning, operation
Store the instrument in its original packaging in a location that fulfils the conditions
listed above. If the original packaging is not available, pack and store the instrument as
described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the packaging.
3. If stored for a prolonged period of time (more than 30 days), place a bag containing a
desiccant inside the packaging.

5. Commissioning, operation

Personnel: Skilled personnel
Only use original parts (see chapter 10 "Accessories").

5.1 Operation

5.1.1 Display

8
7
WIKA operating instructions, model CPH6300
Downloaded from www.Manualslib.com
6
6 5 4 3
manuals search engine
1 Main display: Current measured
value for sensor 1
2 Secondary display: Current
measured value for sensor 2 or
differential value between sensor 1
and sensor 2
1
3 logg arrow: Logger is ready
Arrow blinking: Automatic recording
2 (Logg CYCL) active
4 corr arrow: Zero point or slope
correction has been made
5 user arrow: Measured value is
specified in the freely configurable
user unit
6 Display arrows for measured value
units
7 Display elements for the display of the
Min/Max values, as well as the Tare
function and sea level correction
8 Battery status display
EN
11