Alarm; Faults - WIKA CPH6300 Betriebsanleitung

5. Commissioning, operation / 6. Faults

5.10 Alarm

3 settings are possible:
Alarm off
■
Alarm on with buzzer
■
Alarm on without buzzer
■
In the following cases, if the alarm function is activated (
raised:
Value below lower alarm limit
■
Upper alarm limit
■
Sensor error
■
low battery
■
Err.7: System error (always indicated with a buzzer)
■

6. Faults

Personnel: Skilled personnel
Protective equipment: Protective gloves and safety goggles
Tools: Spanner or torque spanner
WIKA operating instructions, model CPH6300
Downloaded from www.Manualslib.com
AL oFF
.
AL . on
AL . no
AL
AL . Hi exceeded
bAt
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the
instrument must be taken out of operation immediately.
▶
Ensure that pressure or signal is no longer present and protect against
accidental commissioning.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given in chapter
8.2 "Return".
manuals search engine
. so
on
. Lo
or no.So ), an alarm will be
EN
31