2. Short overview / 3. Safety
2.3 Scope of delivery
Hand-held pressure indicator model CPH6300 incl. 2 AAA batteries
■
One sensor connection cable per channel
■
3.1 calibration certificate in accordance with DIN EN 10204 for sensors
■
Choice of sensors
■
Cross-check scope of delivery with delivery note.
3. Safety
3.1 Explanation of symbols
3.2 Intended use
This CPH6300 hand-held pressure indicator can be used as a calibration instrument and
also for any application which requires high-accuracy pressure measurement.
This instrument is not permitted to be used in hazardous areas!
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
WIKA operating instructions, model CPH6300
Downloaded from
www.Manualslib.com
WARNING!
... indicates a potentially dangerous situation that can result in serious injury
or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries
or damage to property or the environment, if not avoided.
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.
manuals search engine
EN
7