External Start/Stop; External Forced Control - Grundfos GENI Montage- Und Betriebsanleitung

4. External start/stop

The GENI module incorporates a digital input for an external contact. The
pump can be started and stopped via this input.
When started, the pump will operate with the setpoint set on the control
panel or with the R100.
Note: If the external contact is used, the connection between terminals 7 and
8 must be replaced by the external connection.
Functional diagram: Start/stop input
Contact position Function
Stop of pump
Start of pump

5. External forced control

The GENI module incorporates inputs for external signals for the forced-con-
trol functions:
• Max. curve duty.
• Min. curve duty.
See connection examples on pages 376 to 379.
Functional diagram: Max. curve input
The max. curve input is only active if terminals 7 and 8 of the start/stop input
are connected.
Max. curve
H
Normal duty
Q
H
Max. curve
Q
8