Connection - Grundfos GENI Montage- Und Betriebsanleitung

2. Connection

The electrical connection and protection must be carried out in accordance
with local regulations.
The GENI module is powered wirelessly from the pump. To ensure correct
function, follow the instructions in section 3. Mounting the module.
Note:
• All cables must be heat-resistant up to +85°C.
• All cables must be installed in accordance with EN 60204-1.
Wires connected to
• outputs NC, NO, C and
• inputs Start/stop, A, Y, B, MIN, MAX, 10 V, X, Q, Z
must be electrically isolated from each other.
5