60
6.7
EXCHANGE OF THE MINERAL SOLUTION CONTAINER
Once the filling level falls below the minimum level, the following message appears in the display:
Please replace the mineral solution container:
/
Remove the empty mineral solution container.
/
Unscrew the lid of the new JUL mineral solution container.
/
Remove the seal with a sharp knife.
/
Push the mineral solution container on from below over the pump head and screw home on the pump
housing.
/
The label of the mineral solution container must be facing forwards!
Upstream protection is interrupted during the changeover. If no new dosing container is available, the
empty dosing container must be filled with water and remain connected to prevent drying out of the pump
head.
6.8
MENU STRUCTURE
Minerallösung
Behälter leer
Fig. 11: Menu structure