Identification Of Hints In The Operating Instructions; Dangers Which Could Arise Due To Non-Observance Of The Safety Instructions; Carrying Out Work In A Safety Conscious Manner; Safety Regulations For The Owner/Operator - Conel FLOW Betriebsanleitung

Identification of hints in the operating instructions |Dangers due to non-observance
of safety regulations |Carrying out work in a safety conscious manner
The presence of a dangerous voltage is identified with the safety symbol.
See DIN 4844-W8.
Applies to safety instructions, the non-observance of which could damage the
unit or affect it's functioning.
Symbols directly on the unit itself, e. g.
> Nameplate
must be carefully observed and must be maintained in a legible condition.
4.1 Dangers which could arise due to non-observance
The non-observance of the safety instructions can lead to both danger to personnel
and also to possible harm to the environment or the unit itself. Non-observance of
the safety instructions can invalidate the rights of the user to any compensation or
redress.
In detail, non-observance can for example result in the following dangers:
> Failure of important functions of the unit/installation
> Danger to personnel by electrical, mechanical or chemical influences
> Danger to the environment by leakage of dangerous substances

4.2 Carrying out work in a safety conscious manner

The safety instructions listed in this operating manual, the existing National Regulati-
ons for Safety, as well as any internal operating or safety regulations which apply in the
user's own premises must be observed.

4.3 Safety Regulations for the owner/operator

All dangers due to electricity must be avoided (for details consult the regulations of
your local Electricity Supply Company).
ATTENTION!
of the safety instructions
30