Storage Of Jul Mineral Solution; Warranty And Service; Inspection By The Operator Every Two Months (Visual Inspection) - Conel CLEAR Serie Montage- Und Betriebsanleitung

64
8.2

STORAGE OF JUL MINERAL SOLUTION

JUL mineral solution must only be transported and stored in sealed mineral solution containers.
The storage temperature of JUL mineral solution must be higher than 5 °C and less than 25 °C.
2 years after the date of filling, the solution gradually loses its effectiveness.
9

WARRANTY AND SERVICE

To ensure the process operates successfully for many years after first use, regular inspection and routine
servicing of the system are essential.
Where home automation is concerned, this is governed by DIN EN 806-5.
We recommend that you agree a service contract.
A service contract is the best way of ensuring correct operation even after the warranty period has
elapsed.
It is desirable that the regular maintenance work and the supply of consumables, mineral substances, wear
material, etc. is performed by a technical service provider or the factory customer service team.
9.1
INSPECTION BY THE OPERATOR EVERY TWO
MONTHS (VISUAL INSPECTION)
To retain your legal warranty rights, it is necessary that an inspection be performed at least every two
months.
The operator checks:
/ Mineral solution level.
Where applicable, replacement of the empty mineral solution container.
/ Leak-tightness of the dosing pump (water leakage).
/ Damage to the dosing pump. Defective parts must be replaced by customer service.
/ Messages on the display.
The manufacturer's instructions concerning shelf life and storage of JUL mineral solution must be ob-
served.