Display Of The Current Charge Level Using The Cockpit App; Display Of The Current Charge Level During The Charging Process; Display Of Current Charge Level Using Remote Control (Optional Accessory); Cockpit App - Ottobock Genium-Bionic Prosthetic System 3B1 Gebrauchsanweisung

6.3.2 Display of the current charge level using the Cockpit app

Once the Cockpit app has been started, the current charge level is displayed in the bottom line of
the screen:

6.3.3 Display of the current charge level during the charging process

During the charging process, the current battery charge level is indicated by the LEDs lit on the
side of the charger.

6.3.4 Display of current charge level using remote control (optional accessory)

Only when "DUAL" marking is not present (see Page 60)
The current charge level is displayed in the status bar of the remote control when it is connected
and switched on:

7 Cockpit app

INFORMATION
The Cockpit app can be downloaded free of charge from the respective online store. For more
information, please visit the website: http://www.ottobock.com/cockpitapp. To download the
Cockpit app, the QR code on the supplied Bluetooth PIN card can be read with the mobile
device (requirement: QR code reader and camera).
1.
component
1.
thesis
2. 68% – Charge level of battery for currently connected pros­
thesis, as a percentage
The cockpit app enables switching from basic mode into the pre-configured
MyModes. In addition, information about the product (step counter, battery
charge level, etc.) can be called up.
The behaviour of the product can be changed to a certain extent on a day-to-
day basis using the app (e.g. while becoming accustomed to the product). At
the next appointment, the prosthetist can trace the changes using the adjust­
ment software.
38% – Charge level of battery for currently connected
– Charge level of battery for currently connected pros­
– Prosthesis is being charged
Quantity Battery charge
0
1
2
3
4
5
level
0%-10%
10%-30%
30%-50%
50%-70%
70%-90%
> 90%
75