Safety; Explanation Of Warning Symbols; Structure Of The Safety Instructions; General Safety Instructions - Ottobock Genium-Bionic Prosthetic System 3B1 Gebrauchsanweisung

4 Safety

4.1 Explanation of warning symbols

Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE

4.2 Structure of the safety instructions

WARNING
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in the event of failure to observe the hazard
> E.g.: Consequence 2 in the event of failure to observe the hazard
► This symbol identifies activities/actions that must be observed/carried out in order to avert
the hazard.

4.3 General safety instructions

WARNING
Non-observance of safety notices
Personal injury/damage to the product due to using the product in certain situations.
► Observe the safety notices and the stated precautions in this accompanying document.
WARNING
Using the prosthesis while operating a vehicle
Accidents due to unexpected behaviour of the prosthesis because of changed damping beha­
viour.
► All users are required to observe their country's national and state driving laws when operat­
ing vehicles. For insurance purposes, drivers should have their driving ability examined and
approved by an authorised test centre.
► Observe national legal regulations for retrofitting your vehicle in accordance with the type of
fitting.
WARNING
Use of damaged power supply unit, adapter plug or battery charger
Risk of electric shock due to contact with exposed, live components.
► Do not open the power supply unit, adapter plug or battery charger.
► Do not expose the power supply unit, adapter plug or battery charger to extreme loading
conditions.
► Immediately replace damaged power supply units, adapter plugs or battery chargers.
CAUTION
Failure to observe warning/error signals
Falling due to unexpected product behaviour because of changed damping behaviour.
The warnings/error signals (see Page 100) and corresponding change in damping settings
►
must be observed.
64